Surefire 556K in Tan. This model is great for the TAN short guns, like an LWRC PSD.

Identical to our FA556SA sound suppressor except (1) the FA556-212 adds slightly less length to your rifle, and (2) FA556-212 adapters are not compatible with M100 GREM or SIMON rifle grenades when the suppressor is removed. The FA556-212 suppressor adds just 4 inches to the original length of your AR-15, C8 SFW, HK 416, M4, M16, SA-80, or other rifle, yet it provides superior sound suppression—even firearms with 10.5" barrels using standard M855 ammunition have their average maximum sound pressure level reduced to well below the OSHA 140-decibel safe level (see comparison chart).

All SureFire sound suppressors require an adapter for attachment to a firearm. Adapters for the FA556-212 sound suppressor screw directly onto the original rifle muzzle threads—see Parts and Accessories below. Adapters for this suppressor vary in compatibility with US military bayonet, blank firing attachment, and M203 grenade launcher—verify before ordering if this is a concern.

Chosen by the US military, SWAT teams, and law enforcement agencies across the country, proven in the world's toughest combat conditions, only SureFire sound suppressors for rifles and machine guns combine every important suppressor feature: excellent sound, flash, and dust signature reduction—key components of SureFire's Total Signature Reduction™ (TSR); minimal and consistent zero shift regardless of attach/detach cycles; rock-solid attachment in seconds; compact size; minimal weight; fail-safe baffles to prevent bullet side-exit; and extreme durability permitting full-time use—in fact, your SureFire suppressor should outlast your firearm barrel.

All SureFire Fast-Attach® sound suppressors provide crucial tactical benefits—they protect shooter and team members against both permanent and temporary hearing loss, enhancing situational awareness and communication; reduce sound signature, concealing shooter's position; reduce or virtually eliminate muzzle flash and dust signatures, concealing shooter's position, preserving night vision and unobstructed view; reduce recoil, improving bullet impact observation and allowing faster follow-up shots.

FA556-212 Monster!!
Identical to our FA556SA sound suppressor except (1) the FA556-212 adds slightly less length to your rifle, and (2) FA556-212 adapters are not compatible with M100 GREM or SIMON rifle grenades when the suppressor is removed. The FA556-212 suppressor adds just 4 inches to the original length of your AR-15, C8 SFW, HK 416, M4, M16, SA-80, or other rifle, yet it provides superior sound suppression—even firearms with 10.5" barrels using standard M855 ammunition have their average maximum sound pressure level reduced to well below the OSHA 140-decibel safe level (see comparison chart).

All SureFire sound suppressors require an adapter for attachment to a firearm. Adapters for the FA556-212 sound suppressor screw directly onto the original rifle muzzle threads—see Parts and Accessories below. Adapters for this suppressor vary in compatibility with US military bayonet, blank firing attachment, and M203 grenade launcher—verify before ordering if this is a concern.

Chosen by the US military, SWAT teams, and law enforcement agencies across the country, proven in the world's toughest combat conditions, only SureFire sound suppressors for rifles and machine guns combine every important suppressor feature: excellent sound, flash, and dust signature reduction—key components of SureFire's Total Signature Reduction™ (TSR); minimal and consistent zero shift regardless of attach/detach cycles; rock-solid attachment in seconds; compact size; minimal weight; fail-safe baffles to prevent bullet side-exit; and extreme durability permitting full-time use—in fact, your SureFire suppressor should outlast your firearm barrel.

All SureFire Fast-Attach® sound suppressors provide crucial tactical benefits—they protect shooter and team members against both permanent and temporary hearing loss, enhancing situational awareness and communication; reduce sound signature, concealing shooter's position; reduce or virtually eliminate muzzle flash and dust signatures, concealing shooter's position, preserving night vision and unobstructed view; reduce recoil, improving bullet impact observation and allowing faster follow-up shots.

Features
High-performance sound attenuation
Rock-solid attachment in seconds without tools
Minimal and consistent zero shift regardless of number of attach/detach cycles
Redundant-welded subcomponents eliminate parts loosening
Compact size and light weight, allowing full-time use
End-mount design does not overlap firearm barrel
Machined from heat-treated stainless steel, finished in a tough, corrosion-resistant coating
Extreme resistance to heat and gas/particle erosion due to special alloy construction
No permanent modifications required for attachment to most M16/AR15 type weapons

SOCOM556-RC
The SureFire SOCOM556-RC Fast-Attach® suppressor is the world's most advanced 5.56 mm rifle suppressor. Selected for the M4 and Mk18 carbines by US Special Operations Command after placing first in the most extensive and rigorous suppressor testing ever conducted, it also received the USSOCOM official safety verification in support of fielding.

Compact and lightweight, the SOCOM556-RC suppressor adds only 4 inches (approximately) to the overall length of your rifle. Like all SureFire Fast-Attach models, the SOCOM556-RC produces minimal, consistent point-of-impact shift compared with the unsuppressed weapon regardless of the number of attach-detach cycles.

The SOCOM556-RC features advanced internal venting to reduce back pressure, reducing the suppressed cyclic rate and gas blowback on the operator. The new design also includes an integrated blast shield in the back section that increases durability. SureFire's patent-pending front-plate design, along with proprietary improvements in gas-flow dynamics, nearly eliminates first-round flash, a technological breakthrough in this area. It also attenuates noise and dust signatures to an unprecedented degree.

A new indexing system means this suppressor mounts to a current-model SureFire muzzle brake or flash hider even more solidly than our previous versions, and is easier to remove after extended firing since the index tab is in a low carbon-buildup area.

The SOCOM556-RC is constructed from advanced US mill-certified high-temperature alloys and heat-treated stainless steel, and features a tough, corrosion-resistant Ionbond coating on the Fast-Attach® lock ring and Cerakote™ ceramic finish on the suppressor body, in either Black or Dark Earth color.

All SureFire SOCOM Series suppressors require a compatible, latest-model SureFire muzzle brake/adapter or flash hider/adapter for attachment to a firearm—see Parts and Accessories on this page.

SureFire sound suppressors for rifles and machine guns combine every important suppressor feature: excellent sound, flash, and dust signature reduction—key components of SureFire's Total Signature Reduction™ (TSR); minimal and consistent zero shift regardless of attach/detach cycles; rock-solid attachment in seconds; compact size; minimal weight; fail-safe baffles to prevent bullet side-exit; and extreme durability permitting full-time use. In fact, your SureFire suppressor should outlast your firearm barrel, depending on use.

All SureFire Fast-Attach® sound suppressors provide crucial tactical benefits—they reduce the weapon's sound signature, concealing operator's position and protecting both the operator and team members against both permanent and temporary hearing loss, while enhancing situational awareness and communication; reduce or virtually eliminate muzzle flash, concealing operator's position and preserving night vision and unobstructed view; reduce dust signature, concealing operator's position and maintaining unobstructed view; and reduce recoil, improving bullet impact observation and allowing for faster follow-up shots.

NOTE: SureFire SOCOM Series Fast-Attach sound suppressors, muzzle brake/suppressor adapters, and flash hider/suppressor adapters are not compatible with previous generation SureFire Fast-Attach sound suppressors, muzzle brakes, or flash hiders.

[NSN: 1005-01-599-6997]
Features
Patented Fast-Attach® design provides rock-solid attachment and easy removal in seconds
New design provides superior sound attenuation, virtual elimination of first-round muzzle flash, and decreased dust signature
Minimal and consistent point-of-impact shift compared with unsuppressed weapon regardless of number of attach/detach cycles
Compact and lightweight for minimal impact on weapon handling characteristics
Internal blast shield increases durability
Advanced core design reduces back pressure, suppressed cyclic rate, and gas blowback
Constructed from advanced high-temperature US mill-certified alloys and stainless steel
Redundant-welded subcomponents eliminate parts loosening
Tough, corrosion-resistant Ionbond and Cerakote™ finish in Black or Dark Earth color

SOCOM556-RC
The SureFire SOCOM556-RC Fast-Attach® suppressor is the world's most advanced 5.56 mm rifle suppressor. Selected for the M4 and Mk18 carbines by US Special Operations Command after placing first in the most extensive and rigorous suppressor testing ever conducted, it also received the USSOCOM official safety verification in support of fielding.

Compact and lightweight, the SOCOM556-RC suppressor adds only 4 inches (approximately) to the overall length of your rifle. Like all SureFire Fast-Attach models, the SOCOM556-RC produces minimal, consistent point-of-impact shift compared with the unsuppressed weapon regardless of the number of attach-detach cycles.

The SOCOM556-RC features advanced internal venting to reduce back pressure, reducing the suppressed cyclic rate and gas blowback on the operator. The new design also includes an integrated blast shield in the back section that increases durability. SureFire's patent-pending front-plate design, along with proprietary improvements in gas-flow dynamics, nearly eliminates first-round flash, a technological breakthrough in this area. It also attenuates noise and dust signatures to an unprecedented degree.

A new indexing system means this suppressor mounts to a current-model SureFire muzzle brake or flash hider even more solidly than our previous versions, and is easier to remove after extended firing since the index tab is in a low carbon-buildup area.

The SOCOM556-RC is constructed from advanced US mill-certified high-temperature alloys and heat-treated stainless steel, and features a tough, corrosion-resistant Ionbond coating on the Fast-Attach® lock ring and Cerakote™ ceramic finish on the suppressor body, in either Black or Dark Earth color.

All SureFire SOCOM Series suppressors require a compatible, latest-model SureFire muzzle brake/adapter or flash hider/adapter for attachment to a firearm—see Parts and Accessories on this page.

SureFire sound suppressors for rifles and machine guns combine every important suppressor feature: excellent sound, flash, and dust signature reduction—key components of SureFire's Total Signature Reduction™ (TSR); minimal and consistent zero shift regardless of attach/detach cycles; rock-solid attachment in seconds; compact size; minimal weight; fail-safe baffles to prevent bullet side-exit; and extreme durability permitting full-time use. In fact, your SureFire suppressor should outlast your firearm barrel, depending on use.

All SureFire Fast-Attach® sound suppressors provide crucial tactical benefits—they reduce the weapon's sound signature, concealing operator's position and protecting both the operator and team members against both permanent and temporary hearing loss, while enhancing situational awareness and communication; reduce or virtually eliminate muzzle flash, concealing operator's position and preserving night vision and unobstructed view; reduce dust signature, concealing operator's position and maintaining unobstructed view; and reduce recoil, improving bullet impact observation and allowing for faster follow-up shots.

NOTE: SureFire SOCOM Series Fast-Attach sound suppressors, muzzle brake/suppressor adapters, and flash hider/suppressor adapters are not compatible with previous generation SureFire Fast-Attach sound suppressors, muzzle brakes, or flash hiders.

[NSN: 1005-01-599-6997]
Features
Patented Fast-Attach® design provides rock-solid attachment and easy removal in seconds
New design provides superior sound attenuation, virtual elimination of first-round muzzle flash, and decreased dust signature
Minimal and consistent point-of-impact shift compared with unsuppressed weapon regardless of number of attach/detach cycles
Compact and lightweight for minimal impact on weapon handling characteristics
Internal blast shield increases durability
Advanced core design reduces back pressure, suppressed cyclic rate, and gas blowback
Constructed from advanced high-temperature US mill-certified alloys and stainless steel
Redundant-welded subcomponents eliminate parts loosening
Tough, corrosion-resistant Ionbond and Cerakote™ finish in Black or Dark Earth color

Specifications

Caliber 5.56 mm (.223 caliber)
Length 6.2 inches
Weight 17.0 ounces
Diameter 1.5 inches
Description

SOCOM556-SB
The compact and lightweight SureFire SOCOM556-SB Fast-Attach® suppressor is designed specifically for 5.56 rifles with barrels shorter than 10 inches, or longer barrels firing unstable ammunition (e.g. most jacketed frangible and "green" ammunition). It is a modified version of the SOCOM556RC, which was selected by US Special Operations Command as first among all competitors in the most extensive and rigorous suppressor evaluation in history, covering all aspects of suppressor performance, and which also received the USSOCOM official safety verification in support of fielding.

Constructed of advanced high-temperature alloys and stainless steel, the SOCOM556-SB features a larger bore to minimize the probability of baffle strikes due to unstable projectiles, a common issue with ultra-short-barreled weapons and some types of unjacketed frangible and "green" ammunition.

The SOCOM556-SB suppressor also features advanced internal venting that reduces back pressure, thereby reducing the suppressed cyclic rate and gas blowback on the operator. The new design includes an integrated blast shield in the back section that increases durability. The patent-pending front-plate design, along with proprietary improvement in gas-flow dynamics, nearly eliminates first-round flash, a true technological breakthrough in this area. It also attenuates noise and dust signatures to an unprecedented degree.

A new indexing system means this suppressor mounts to a SureFire muzzle brake or flash hider even more solidly than our previous models and is easier to remove after extended firing since the index tab is in a low carbon-buildup area.

Like all SureFire Fast-Attach models, the SOCOM556-RC produces minimal, consistent shift in point of impact compared with the unsuppressed weapon regardless of the number of attach-detach cycles.

The SOCOM556-SB is constructed from advanced US mill-certified high-temperature alloys and heat-treated stainless steel, and features a tough, corrosion-resistant Ionbond coating on the Fast-Attach® lock ring and Cerakote™ ceramic finish on the suppressor body, in either Black or Dark Earth color.

All SureFire SOCOM Series suppressors require a compatible, latest-model SureFire muzzle brake/adapter or flash hider/adapter for attachment to a firearm—see Parts and Accessories on this page.

SureFire sound suppressors for rifles and machine guns combine every important suppressor feature: excellent sound, flash, and dust signature reduction—key components of SureFire's Total Signature Reduction™ (TSR); minimal and consistent zero shift regardless of attach/detach cycles; rock-solid attachment in seconds; compact size; minimal weight; fail-safe baffles to prevent bullet side-exit; and extreme durability permitting full-time use. In fact, your SureFire suppressor should outlast your firearm barrel, depending on use.

All SureFire Fast-Attach® sound suppressors provide crucial tactical benefits—they reduce the weapon's sound signature, concealing operator's position and protecting both the operator and team members against both permanent and temporary hearing loss, while enhancing situational awareness and communication; reduce or virtually eliminate muzzle flash, concealing operator's position and preserving night vision and unobstructed view; reduce dust signature, concealing operator's position and maintaining unobstructed view; and reduce recoil, improving bullet impact observation and allowing for faster follow-up shots.

NOTE 1: SureFire SOCOM Series Fast-Attach sound suppressors, muzzle brake/suppressor adapters, and flash hider/suppressor adapters are not compatible with previous generation SureFire Fast-Attach sound suppressors, muzzle brakes, or flash hiders.

NOTE 2: Use of unjacketed frangible ammunition is not recommended for SureFire Suppressors and may void warranty.
Features
Designed for 5.56 caliber rifles with barrels shorter than 10 inches or when firing unstable "green" ammunition; larger suppressor bore minimizes probability of baffle strikes
Patented Fast-Attach® design provides rock-solid attachment and easy removal in seconds
Same revolutionary suppressor technology as SureFire's SOCOM556-RC, winner of US Special Operations Command (USSOCOM) extensive and rigorous suppressor trials
Provides effective attenuation of sound and dust signatures
Minimal, consistent point-of-impact shift compared with unsuppressed weapon regardless of number of attach-detach cycles
Compact and lightweight for minimum overall weapon length and minimum impact on handling characteristics
Advanced core design to reduce back pressure, cyclic rate, and gas blowback
Patent-pending front-plate design and proprietary gas-flow improvements virtually eliminate first-round flash
Integrated blast shield increases durability
Constructed of advanced US mill-certified high-temperature alloys and stainless steel
Redundant-welded subcomponents eliminate parts loosening
Tough, corrosion-resistant Ionbond and Cerakote™ finish in Black or Dark Earth color
Restrictions

ITAR Notice
Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S. Department of State, Office of Defense Trade Controls, prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulations, Parts 120-130.

Specifications

Caliber 5.56 mm (.223 caliber)
Length 6.2 inches
Weight 17.0 ounces
Diameter 1.5 inches
Description

SOCOM556-SB
The compact and lightweight SureFire SOCOM556-SB Fast-Attach® suppressor is designed specifically for 5.56 rifles with barrels shorter than 10 inches, or longer barrels firing unstable ammunition (e.g. most jacketed frangible and "green" ammunition). It is a modified version of the SOCOM556RC, which was selected by US Special Operations Command as first among all competitors in the most extensive and rigorous suppressor evaluation in history, covering all aspects of suppressor performance, and which also received the USSOCOM official safety verification in support of fielding.

Constructed of advanced high-temperature alloys and stainless steel, the SOCOM556-SB features a larger bore to minimize the probability of baffle strikes due to unstable projectiles, a common issue with ultra-short-barreled weapons and some types of unjacketed frangible and "green" ammunition.

The SOCOM556-SB suppressor also features advanced internal venting that reduces back pressure, thereby reducing the suppressed cyclic rate and gas blowback on the operator. The new design includes an integrated blast shield in the back section that increases durability. The patent-pending front-plate design, along with proprietary improvement in gas-flow dynamics, nearly eliminates first-round flash, a true technological breakthrough in this area. It also attenuates noise and dust signatures to an unprecedented degree.

A new indexing system means this suppressor mounts to a SureFire muzzle brake or flash hider even more solidly than our previous models and is easier to remove after extended firing since the index tab is in a low carbon-buildup area.

Like all SureFire Fast-Attach models, the SOCOM556-RC produces minimal, consistent shift in point of impact compared with the unsuppressed weapon regardless of the number of attach-detach cycles.

The SOCOM556-SB is constructed from advanced US mill-certified high-temperature alloys and heat-treated stainless steel, and features a tough, corrosion-resistant Ionbond coating on the Fast-Attach® lock ring and Cerakote™ ceramic finish on the suppressor body, in either Black or Dark Earth color.

All SureFire SOCOM Series suppressors require a compatible, latest-model SureFire muzzle brake/adapter or flash hider/adapter for attachment to a firearm—see Parts and Accessories on this page.

SureFire sound suppressors for rifles and machine guns combine every important suppressor feature: excellent sound, flash, and dust signature reduction—key components of SureFire's Total Signature Reduction™ (TSR); minimal and consistent zero shift regardless of attach/detach cycles; rock-solid attachment in seconds; compact size; minimal weight; fail-safe baffles to prevent bullet side-exit; and extreme durability permitting full-time use. In fact, your SureFire suppressor should outlast your firearm barrel, depending on use.

All SureFire Fast-Attach® sound suppressors provide crucial tactical benefits—they reduce the weapon's sound signature, concealing operator's position and protecting both the operator and team members against both permanent and temporary hearing loss, while enhancing situational awareness and communication; reduce or virtually eliminate muzzle flash, concealing operator's position and preserving night vision and unobstructed view; reduce dust signature, concealing operator's position and maintaining unobstructed view; and reduce recoil, improving bullet impact observation and allowing for faster follow-up shots.

NOTE 1: SureFire SOCOM Series Fast-Attach sound suppressors, muzzle brake/suppressor adapters, and flash hider/suppressor adapters are not compatible with previous generation SureFire Fast-Attach sound suppressors, muzzle brakes, or flash hiders.

NOTE 2: Use of unjacketed frangible ammunition is not recommended for SureFire Suppressors and may void warranty.
Features
Designed for 5.56 caliber rifles with barrels shorter than 10 inches or when firing unstable "green" ammunition; larger suppressor bore minimizes probability of baffle strikes
Patented Fast-Attach® design provides rock-solid attachment and easy removal in seconds
Same revolutionary suppressor technology as SureFire's SOCOM556-RC, winner of US Special Operations Command (USSOCOM) extensive and rigorous suppressor trials
Provides effective attenuation of sound and dust signatures
Minimal, consistent point-of-impact shift compared with unsuppressed weapon regardless of number of attach-detach cycles
Compact and lightweight for minimum overall weapon length and minimum impact on handling characteristics
Advanced core design to reduce back pressure, cyclic rate, and gas blowback
Patent-pending front-plate design and proprietary gas-flow improvements virtually eliminate first-round flash
Integrated blast shield increases durability
Constructed of advanced US mill-certified high-temperature alloys and stainless steel
Redundant-welded subcomponents eliminate parts loosening
Tough, corrosion-resistant Ionbond and Cerakote™ finish in Black or Dark Earth color
Restrictions

ITAR Notice
Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S. Department of State, Office of Defense Trade Controls, prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulations, Parts 120-130.

SOCOM762-RC
SureFire's SOCOM762-RC Fast-Attach® suppressor represents a revolutionary breakthrough for attenuating the signature of 7.62 rifles, including those chambered for high-intensity magnum calibers. This compact and lightweight suppressor—mounted to the Mk13 sniper rifle in .300 Win-Mag—recently won the Mk13 contract award with US Special Operations Command in the most extensive suppressor evaluation in history. The rigorous USSOCOM testing addressed all aspects of suppressor performance, and SureFire came out on top. The SOCOM762-RC also received the USSOCOM official safety verification in support of fielding.

The SOCOM762-RC features advanced gas-flow dynamics that reduce back pressure, thereby reducing the suppressed cyclic rate and gas blowback on the operator when used on auto-cycling guns. SureFire's patent-pending front-plate design, along with the proprietary improvement in gas-flow dynamics, nearly eliminates first-round flash, a true technological breakthrough in this area. It attenuates noise and dust signatures to an unprecedented degree.

A new indexing system means this suppressor mounts to a SureFire muzzle brake or flash hider even more solidly than our previous models, and is easier to remove after extended firing since the index tab is in a low carbon-buildup area.

Like all SureFire Fast-Attach models, the SOCOM762-RC produces minimal, consistent shift in point of impact compared with the unsuppressed weapon regardless of the number of attach-detach cycles.

The SOCOM762-RC is constructed from advanced US mill-certified high-temperature alloys and heat-treated stainless steel, and features a tough, corrosion-resistant Ionbond coating on the Fast-Attach® lock ring and Cerakote™ ceramic finish on the suppressor body, in either Black or Dark Earth color.

All SureFire SOCOM Series suppressors require a compatible, latest-model SureFire muzzle brake/adapter or flash hider/adapter for attachment to a firearm—see Parts and Accessories on this page.

SureFire sound suppressors for rifles and machine guns combine every important suppressor feature: excellent sound, flash, and dust signature reduction—key components of SureFire's Total Signature Reduction™ (TSR); minimal and consistent zero shift regardless of attach/detach cycles; rock-solid attachment in seconds; compact size; minimal weight; fail-safe baffles to prevent bullet side-exit; and extreme durability permitting full-time use. In fact, your SureFire suppressor should outlast your firearm barrel, depending on use.

All SureFire Fast-Attach® sound suppressors provide crucial tactical benefits—they reduce the weapon's sound signature, concealing operator's position and protecting both the operator and team members against both permanent and temporary hearing loss, while enhancing situational awareness and communication; reduce or virtually eliminate muzzle flash, concealing operator's position and preserving night vision and unobstructed view; reduce dust signature, concealing operator's position and maintaining unobstructed view; and reduce recoil, improving bullet impact observation and allowing for faster follow-up shots.

NOTE: SureFire SOCOM Series Fast-Attach sound suppressors, muzzle brake/suppressor adapters, and flash hider/suppressor adapters are not compatible with previous generation SureFire Fast-Attach sound suppressors, muzzle brakes, or flash hiders.

[NSN: 1005-01-599-7027]
Features
Patented Fast-Attach® design provides rock-solid attachment and easy removal in seconds
Designed for all 7.62 rifles specifically including those chambered for high-pressure magnum cartridges
New design provides superior sound attenuation, virtual elimination of first-round muzzle flash, and decreased dust signature
Minimal and consistent point-of-impact shift compared with unsuppressed weapon regardless of number of attach/detach cycles
Compact and lightweight for minimal impact on weapon handling characteristics
Advanced core design reduces back pressure, suppressed cyclic rate, and gas blowback
Constructed from advanced high-temperature US mill-certified alloys and stainless steel
Redundant-welded subcomponents eliminate parts loosening
Tough, corrosion-resistant Ionbond and Cerakote™ finish in Black or Dark Earth color
Restrictions

ITAR Notice
Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S. Department of State, Office of Defense Trade Controls, prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulations, Parts 120-130.

SOCOM762-RC
SureFire's SOCOM762-RC Fast-Attach® suppressor represents a revolutionary breakthrough for attenuating the signature of 7.62 rifles, including those chambered for high-intensity magnum calibers. This compact and lightweight suppressor—mounted to the Mk13 sniper rifle in .300 Win-Mag—recently won the Mk13 contract award with US Special Operations Command in the most extensive suppressor evaluation in history. The rigorous USSOCOM testing addressed all aspects of suppressor performance, and SureFire came out on top. The SOCOM762-RC also received the USSOCOM official safety verification in support of fielding.

The SOCOM762-RC features advanced gas-flow dynamics that reduce back pressure, thereby reducing the suppressed cyclic rate and gas blowback on the operator when used on auto-cycling guns. SureFire's patent-pending front-plate design, along with the proprietary improvement in gas-flow dynamics, nearly eliminates first-round flash, a true technological breakthrough in this area. It attenuates noise and dust signatures to an unprecedented degree.

A new indexing system means this suppressor mounts to a SureFire muzzle brake or flash hider even more solidly than our previous models, and is easier to remove after extended firing since the index tab is in a low carbon-buildup area.

Like all SureFire Fast-Attach models, the SOCOM762-RC produces minimal, consistent shift in point of impact compared with the unsuppressed weapon regardless of the number of attach-detach cycles.

The SOCOM762-RC is constructed from advanced US mill-certified high-temperature alloys and heat-treated stainless steel, and features a tough, corrosion-resistant Ionbond coating on the Fast-Attach® lock ring and Cerakote™ ceramic finish on the suppressor body, in either Black or Dark Earth color.

All SureFire SOCOM Series suppressors require a compatible, latest-model SureFire muzzle brake/adapter or flash hider/adapter for attachment to a firearm—see Parts and Accessories on this page.

SureFire sound suppressors for rifles and machine guns combine every important suppressor feature: excellent sound, flash, and dust signature reduction—key components of SureFire's Total Signature Reduction™ (TSR); minimal and consistent zero shift regardless of attach/detach cycles; rock-solid attachment in seconds; compact size; minimal weight; fail-safe baffles to prevent bullet side-exit; and extreme durability permitting full-time use. In fact, your SureFire suppressor should outlast your firearm barrel, depending on use.

All SureFire Fast-Attach® sound suppressors provide crucial tactical benefits—they reduce the weapon's sound signature, concealing operator's position and protecting both the operator and team members against both permanent and temporary hearing loss, while enhancing situational awareness and communication; reduce or virtually eliminate muzzle flash, concealing operator's position and preserving night vision and unobstructed view; reduce dust signature, concealing operator's position and maintaining unobstructed view; and reduce recoil, improving bullet impact observation and allowing for faster follow-up shots.

NOTE: SureFire SOCOM Series Fast-Attach sound suppressors, muzzle brake/suppressor adapters, and flash hider/suppressor adapters are not compatible with previous generation SureFire Fast-Attach sound suppressors, muzzle brakes, or flash hiders.

[NSN: 1005-01-599-7027]
Features
Patented Fast-Attach® design provides rock-solid attachment and easy removal in seconds
Designed for all 7.62 rifles specifically including those chambered for high-pressure magnum cartridges
New design provides superior sound attenuation, virtual elimination of first-round muzzle flash, and decreased dust signature
Minimal and consistent point-of-impact shift compared with unsuppressed weapon regardless of number of attach/detach cycles
Compact and lightweight for minimal impact on weapon handling characteristics
Advanced core design reduces back pressure, suppressed cyclic rate, and gas blowback
Constructed from advanced high-temperature US mill-certified alloys and stainless steel
Redundant-welded subcomponents eliminate parts loosening
Tough, corrosion-resistant Ionbond and Cerakote™ finish in Black or Dark Earth color
Restrictions

ITAR Notice
Export of the commodities described herein is strictly prohibited without a valid export license issued by the U.S. Department of State, Office of Defense Trade Controls, prescribed in the International Traffic in Arms Regulation (ITAR), Title 22, Code of Federal Regulations, Parts 120-130.

The FA338SS sound suppressor features a barrel overlap design that adds just 6.4 inches to the original length of your Accuracy International AWM, Sako TRG-42, Armalite AR-30, or other semi-auto or bolt action .338 Lapua Magnum (8.6X70 mm) rifle while providing superior sound suppression. The overlap design requires at least 2.75" of clear barrel, measured from the muzzle rearward.

All SureFire sound suppressors require an adapter for attachment to a firearm. Adapters for the FA338SS sound suppressor screw directly onto the original rifle muzzle threads—see Parts and Accessories below.

Chosen by the US military, SWAT teams, and law enforcement agencies across the country, proven in the world's toughest combat conditions, only SureFire sound suppressors for rifles and machine guns combine every important suppressor feature: excellent sound, flash, and dust signature reduction—key components of SureFire's Total Signature Reduction™ (TSR); minimal and consistent zero shift regardless of attach/detach cycles; rock-solid attachment in seconds; compact size; minimal weight; fail-safe baffles to prevent bullet side-exit; and extreme durability permitting full-time use—in fact, your SureFire suppressor should outlast your firearm barrel.

All SureFire Fast-Attach® sound suppressors provide crucial tactical benefits—they protect shooter and team members against both permanent and temporary hearing loss, enhancing situational awareness and communication; reduce sound signature, concealing shooter's position; reduce or virtually eliminate muzzle flash and dust signatures, concealing shooter's position, preserving night vision and unobstructed view; reduce recoil, improving bullet impact observation and allowing faster follow-up shots.

Experience solid, trouble free lock up with the Specwar 556. Made mission-ready with a fast attach mounting system enabled by its unique Active Spring Retention design, installation and removal takes seconds. The durable baffle stack and minimal point of impact shift make this suppressor the most reliable, even in the harshest conditions.

ACTIVE SPRING RETENTION (ASR)™

The Specwar 5.56 mm features the patent pending Active Spring Retention (ASR)™ mounting system for solid trouble free lockup. Installation and removal takes seconds. The use of our proprietary TrueBore™ manufacturing process ensures precise bore alignment and minimal point of impact shift. Includes a flash hider or muzzle brake.

Thunder Beast Arms 338BA

The 338BA is our high-performance .338 caliber suppressor design for applications where the rifle will be shot with and without the suppressor and recoil reduction is required in both cases. The 338BA effectively suppresses the extreme muzzle blast of the .338 magnums down to levels similar to suppressed .308. The 338BA brake is left attached to the rifle at all times, and reduces recoil when the suppressor is not used. When the 338BA suppressor is mounted to the brake, the rifle's "suppressed zero" returns and the mount design ensures accuracy.

We developed the 30BA and 338BA to meet the requirement that some customers have for a suppressor that mounts over a muzzle device. We haven't found a "quick mount" on the market that meets our accuracy and repeatability requirements, so we developed the BA series to mount over our brake and provide the same repeatability as our direct thread attach suppressors, like the 30P-1. The 30BA features a conical shoulder for rock solid POI repeatability and to make sure it never comes loose.

The 338BA, like the 338P-1, has additional volume to handle the gas pressure of the .338 Lapua Magnum, but only weighs fractionally more than a .308 suppressor.

The 338BA is constructed of titanium with a fully-welded baffle core. This material and method of construction provides a great strength to weight ratio. Our suppressors are designed from the ground up for superior accuracy. The 338BA can take whatever your big-bore precision rifle can dish out while keeping all your rounds on target.

The 30BA brake will accept the 338BA suppressor, so with a .30 caliber brake on your .308 and a .338 brake on your .338 Lapua Magnum, you can use a single 338BA suppressor on both. The 30BA suppressor will not fit on a 338BA brake.

SPECIAL FEATURES
Brake-in-suppressor design
Conical shoulder surface
Helical Baffle Technology
100% titanium construction
360-degree fully-welded baffle core
Rock-Solid POI Repeatability
Extreme suppression levels for .338 cartridges